certified ss-220 r8 aha 6/30/03 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 1 of 10 multi layer ferrite power beads type czp designed to reduce noise at high frequencies standard eia packages: 1j, 2a, 2b nickel barrier with solder overcoat for excellent solderability magnetically shielded 2. dimensions 1. general part 1j (0603) 2a (0805) 2b (1206) table 1 0.063?.006 (1.60?.15) 0.079?.008 (2.00?.20) 0.049?.008 (1.25?.20) 0.035?.008 (0.90?.20) 0.020?.010 (0.51?.25) 0.126?.008 (3.20?.20) 0.063?.008 (1.60?.20) 0.043?.008 (1.10?.20) 0.020?.010 (0.51?.25) 0.031?.006 (0.80?.15) 0.031?.006 (0.80?.15) 0.014?.006 (0.36?.15) lw t d dimensions - inches (mm) w l d t d terminations (metallization bands) electrodes ni plating silver metallization solder plating koa speer electronics, inc. 3. type designation the type designation shall be in the following form: rating tolerance impedence 0805 m 500 packaging t mcp type size tolerance impedence 1j 2a 2b m: ?0% p: ?5% 2 significant figures + 1 multiplier 2a m 500 packaging te: 7" embossed plastic 1j, 2a: 4,000 pcs/reel 2b: 3,000 pcs/reel td termination material l: snpb t: sn l czp type old type new type permability code f permability code f p f
czp2bf*te800** 80 0.03 2,000 czp2bf*te500** 50 0.025 3,000 czp2bf*te650** 65 0.03 2,000 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 2 of 10 ss-220 r8 4. standard applications czp1jp*te100** 10 0.02 4,000 czp1jf*te600** 60 0.1 500 czp1jf*te301** 300 0.1 2,000 czp2af*te070** 7 0.02 3,000 czp2af*te100** 10 0.02 3,000 czp2af*te110** 11 0.025 3,000 czp2af*te150** 15 0.025 3,000 czp2af*te220** 22 0.025 3,000 czp2af*te221** 220 0.05 2,000 czp2af*te301** 300 0.15 1,000 czp2af*te601** 600 0.2 1,000 czp2af*te102** 1000 0.2 1,000 czp2bf*te190** 19 0.02 3,000 czp2bf*te260** 26 0.02 3,000 czp2bf*te300** 30 0.02 3,000 czp2bf*te310** 31 0.02 3,000 impedance @ 100mhz ? ? maximum dc resistance ?? ? allowable dc current (ma) operating temperature -55? to 125? ordering code *add termination material character (l,t) ** add tolerance character (j, k, m, p) ? impedance test method: hp4291a ?? dcr test method: keithley 580 czp2af*te201** 200 0.15 1,000 koa speer electronics, inc. czp2af*te800** 80 0.1 1,000 czp1jf*te050** 5 0.04 1,000 czp1jf*te300** 30 0.06 3,000 czp2af*te400** 40 0.03 2,000 czp2af*te450** 45 0.03 2,000 czp2af*te600** 60 0.025 3,000 czp2bf*te700** 70 0.03 2,000 czp2af*te300** 30 0.025 3,000 -55? to 125? -55? to 125? czp1jf*te121** 120 0.1 2,000
ss-220 r8 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 3 of 10 koa speer electronics, inc. czp2bf*te900** 90 0.1 1,000 4. standard applications (continued) czp2bf*te121** 120 0.1 1,000 czp2bf*te601** 600 0.2 1,000 czp2bp*te101** 100 0.03 3,000 czp2bp*te121** 120 0.04 3,000 czp2bp*te601** 600 0.1 1,500 impedance @ 100mhz ? ? maximum dc resistance ?? ? allowable dc current (ma) operating temperature -55? to 125? ordering code *add termination material character (l,t) ** add tolerance character (j, k, m, p) ? impedance test method: hp4291a ?? dcr test method: keithley 580 czp2bf*te101** 100 0.1 1,000 czp2bp*te700** 70 0.2 3,000 5. 0603 (1j) graphs czp1jf300 czp1jf600 czp1jf050 czp1jf100 czp1jf301
page 4 of 10 ss-220 r8 koa speer electronics, inc. 5. 0805 (2a) graphs czp2af100 czp2af110 czp2af150 czp2af201 czp2af221 czp2af300 czp2af301 czp2af400 czp2af450 czp2af601 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com czp2af070 czp2af100
ss-220 r8 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com koa speer electronics, inc. czp2af800 5. 0805 (2a) graphs (continued) 5. 1206 (2b) graphs czp2bf101 czp2bf190 czp2bf260 czp2bf300 czp2bf310 czp2bf500 czp2bf500 czp2bf650 page 5 of 10 czp2bf121
bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 6 of 10 ss-220 r8 koa speer electronics, inc. 5. 1206 (2b)graphs (continued) czp2bf700 czp2bf800 czp2bf900 czp2bp101 czp2bp121 czp2bp601
ss-220 r8 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 7 of 10 koa speer electronics, inc. item requirement conditions operating temperature -55? ~ +125? storage temperature 40? @ 70% humidity sealed plastic bags with desiccant shall be used to reduce the potential of oxidation on the terminations during storage. resistance to solder change in impedance: relative to value before flux: 5-10 sec dip heat test ?0%. after flux: air dry for 15 sec appearance: there shall be no cracking preheat: 150? ?0? solder coverage: more than 75% of the terminal preheat time: 60 sec electrode shall be covered with solder. solder temp: 260? ?? dip time: 10 ? sec solderability solder coverage: more than 95% of the flux: 5-10 sec dip termination shall be covered with solder. after flux: air dry for 15 sec solder temp: 245? ?? dip time: 5 ?.5 sec leach resistance appearance: there shall be no visible signs of the bead shall be subjected to the following physical or mechanical damage (i.e. no cracks). 5 steps for the period of time shown below. terminations: termination must not be leached the 5 steps constitute one (1) rotation. away for more than 5%. 4 rotations shall be carried out. 1) flux: 5-10 sec 2) after flux: air dry for 15 sec 3) solder temp: 230? ?? 4) dip time: 5 ?.5 sec 5) cool: air cool for 60 seconds insulation resistance insulation resistance: min 1g ohms solvent resistance change in impedance: relative to value before cleaning by: test ?0%. washer: ultrasonic washer (100w) solvent: isopropyl alcohol time: 3 minutes terminal strength appearance: the terminal electrode shall not type w(kgf) time (hanging test) break off, nor shall there be damage to the body. 1j 0.5 30 sec ? sec 2a 1.0 30 sec ? sec 2b 1.5 30 sec ? sec terminal strength appearance: there shall be no evidence of type w(kgf) time (push test) mechanical degradations to terminals or body. 1j 1.4 60 sec 2a 1.8 60 sec 2b 2.3 60 sec bending strength appearance: there shall be no physical or board: 90x40x1.6mm mechanical damage. bend: 1mm impedance: relative to initial value before test time: 5 sec ?0%. 5. characteristics
ss-220 r8 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 8 of 10 item requirement conditions mechanical shock appearance: there shall be no physical or force: 50g mechanical damage. time: 11 msec impedance: relative to initial value before test there shall be 3 shocks in each of 6 directions ?0%. (18 shocks total). vibration impedance: relative to initial value ?0%. only endurance conditioning by sweeping shall be made. the entire frequency range from 10-2,000hz and return to 10hz in 20 minutes (this shall constitute one cycle). amplitude: 1.5mm the test shall have a 15g peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). thermal shock appearance: there shall be no physical or step temperature time mechanical damage. 1-start -40? ?? impedance: relative to initial value ?0%. 2-hold -40? ?? 30 min ? min dcr: the dcr shall not exceed initial specified 3-transfer 0.5 min max. value. 4-hold +105? ?? 30 min ? min 5-transfer 0.5 min max. testing of the parts will be made at 0 hours, 250 hours and 500 hours. before testing, the parts steps 1 thru 5 constitute one complete cycle shall be allowed to cool to room temperature for and the test shall consist of a total of 500 24 hours. cycles. load humidity appearance: there shall be no physical or temperature: 85? ?? mechanical damage. relative humidity: 85% impedance: relative to initial value ?5%. time: 1,000 hours total apply: 100% rated current measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. life test appearance: there shall be no physical or temperature: 85? ?? mechanical damage time: 1,000 hours total impedance: relative to initial value ?5% apply: 100% rated current measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. 5. characteristics (continued) koa speer electronics, inc.
a 13 d e central hole (mm) 2b 1206 2a 0805 1j 0603 tape ? ? e 7 (178) 0.827 (21) 0.079 (2.0) dimensions - inches (mm) bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com page 9 of 10 ss-220 r8 6. packaging specifications koa s multilayer components are provided on tape-and-reel for use in pick-and-place machines. the reel size is 7 inch. koa speer electronics, inc. 7. dimensions - inches (mm) 0.0430.002 (1.10.1) 0.0750.002 (1.90.1) 0.3180.002 (8.10.1) 0.0630.002 (1.60.1) 0.0930.002 (2.40.1) 0.3180.002 (8.10.1) 0.0710.002 (1.80.1) 0.1380.002 (3.50.1) 0.3180.002 (8.10.1) 2b 1206 2a 0805 1j 0603 tape a b w t 1 b a 1.5 +0.1 -0 p 1 2.0 4.0 0.1 direction of feed 1.75 0.1 w t 1 t 1 0.1570.004 (4.00.1) 0.1570.004 (4.00.1) 0.1570.004 (4.00.1) p 1 0.0430.002 (1.10.1) 0.0460.002 (1.20.1) 0.0710.002 (1.80.1) t 1 dimensions - inches (mm)
ss-220 r8 bolivar drive p.o. box 547 bradford, pa 16701 usa 814-362-5536 fax 814-362-8883 www.koaspeer.com notice: the information contained in this spec sheet is believed to be accurate and up-to-date. koa speer electronics reserves th is right to change these specifications without notice. page 10 of 10 10. recommended temperature profiles for soldering 9. recommended pc board land patterns - mm (inches) 1j (0603) 2.6 (0.102) 3.0 (0.118) 4.4 (0.173) 0.6 (0.023) 1.0 (0.039) 2.2 (0.087) 0.8 (0.031) 1.0 (0.039) 1.4 (0.055) 2a (0805) 2b (1206) chip size l g h g l h 250 c 150 c 60 seconds max. preheat 100 seconds max. soldering 10 seconds max. natural cooling recommended temperature profile for wave soldering 250 c 150 c 60 seconds max. preheat 100 seconds max. soldering 10 seconds max. natural cooling recommended temperature profile for reflow soldering 20 seconds max. 200 c koa speer electronics, inc.
|
